Plastic Injection Mold, Injection Mold Maker, Mold Parts, JinHong Plastic Mold Factory

    The slider, also known as the row position, is also called the lateral centering mechanism, which is not unfamiliar to the mold design personnel. But to ordinary people, it seems so unfamiliar.

    The slider is a mold component that can slide perpendicular to the mold opening and closing direction or at a certain angle to the mold opening and closing direction during the mold opening action of the mold. When the product structure makes it impossible for the mold to be demolded normally without the use of the slider, the slider must be used. The basic components of the slider: the general conventional slider is composed of a slider seat, slider insert, pressure plate, shovel, inclined guide column, limit screw, wear-resistant sheet, and spring, each component will have a corresponding function.

    The material itself has the appropriate hardness, wear resistance, and enough to withstand the friction of movement. The hardness of the cavity part or core part on the slider should be the same level as the other parts of the cavity core. When the product structure makes it impossible for the mold to be demolded normally without the use of the slider, the slider must be used. The material itself has the appropriate hardness, wear resistance, and enough to withstand the friction of movement. Sliders are widely used in spraying equipment, CNC machine tools, electronics, automobiles, medical equipment, machinery, mold opening, and many other fields.

    In the mold, the slider has several positioning methods.

    1、The slider insert and the slider seat are connected and fixed by the hanging table, and the positioning method of screw locking. The slider insert and the slider seat are separated, which is convenient for processing or subsequent mold modification.

    2、A single hole can be used as a needle-inlaid pressure plate to lock into the sliding seat for positioning

    3、The slider insert and the slider seat are fixed by mushroom heads, the screws are locked from the back of the slider seat, and the slider insert and the slider seat are separated, which is convenient for processing or subsequent mold modification.